How is the advertising engraving machine diagonal?

1. Loosen the screws on the gantry and move the machine back and forth according to the error. Then tighten the screws that fix the gantry so that the adjusted gantry is not tilted (this method is only applicable to steel gantry)

2. The gantry of the cast aluminum side plate needs to loosen the slider and the gear box to move back and forth according to the error.

3. If there is such a problem with the screw drive machine, you need to replace the silk mother and adjust the gantry support plate.

How to pay attention to the diagonal of the advertising engraving machine? The method of loosening the gear box to push the motor can only solve the problem temporarily.

How is the square engraving of the advertising engraving machine different?

1, the 1mX1.5m rectangle four corner points with a knife eye, measuring the diagonal length;

2. If there is any deviation, open the machine to one end, use a wooden stick to hold the Y-axis side, and pull the Y-axis to the top of the drive line.

3, the computer manually pulls off one side of the line every time 3mm impact;

4. Measure the diagonal again;

5. Repeat the adjustment until the two diagonals are within 1m.

How is the horse advertising engraving machine diagonal? Dema is a manufacturer specializing in the production of advertising engraving machines. Each factory must be a fine product. The advertising engraving machine after installation and commissioning does not need diagonal lines.

After talking about the diagonal of the advertising engraving machine, let’s talk about the characteristics of the DEMA-M2 advertising engraving machine.

1. A heavy-duty machining center suitable for gravity cutting.

2. The whole machine adopts a unique rack double drive structure, which improves the stability and tensile strength of the machine tool.

3. The whole plate welding structure is adopted, and the whole machine is formed into a one-time finishing process after heat treatment.

4. The table top is PVC vacuum adsorption plus aluminum alloy pressure groove, which can strongly adsorb materials of different areas and can be clamped.

5. It is equipped with mature Weihong control system to ensure the operation of the machine at high speed, fine serrated ripple, smooth bottom surface and clear outline.

6. High-flexible cable made of imported materials ensures that the machine tool is not easily broken during long-term repeated operation.