Many stone carving factories have problems such as over-travel alarms when running stone engraving machines. So what is an over-travel alarm? How should we do this in the face of such problems? Today, let everyone thoroughly understand it.
First of all, the overtravel alarm refers to the alarm phenomenon that occurs during the operation of the engraving machine. This alarm phenomenon occurs because the operation of the engraving machine has reached the limit value and the limit position, so it is called the overtravel alarm. .
Stone engraving machine manufacturers will inform customers of the relevant limit values and technical parameters when they purchase the engraving machine, but there are some related problems in the process of running. The overtravel alarm occurs mainly because the size of the machining drawing exceeds the range of the machine tool, or the screw of the machine is loose, or the link is faulty and cannot be operated. It is also possible that the coordinate is out of the numerical range.
When a super-layer alarm occurs, all the reels are in a passive state. If you want the machine to continue running, you can only press and hold the manual button to make the machine run normally. In this case, stop the use of the machine and change the corresponding coordinate parameters so that the range of operation is within the range of the machine, so that the machine is far from its limit value. Otherwise, the service life of the machine will be affected if the time is long.
