Steps to properly operate the stone engraving machine:
1. Before starting the stone engraving machine, first make sure that all connections between the machine and the computer are normal, then turn on the machine power and computer power. After the system is started, enter the NCStudio CNC system.
2. Select the "Return to machine origin" menu after opening the control system. The machine will automatically return to the machine origin and correct the system coordinate system. In some cases, after the normal shutdown as above, the power is turned back on and the last operation is continued, and the user does not have to perform a mechanical reset operation. The NCStudio system saves the current coordinate information when it exits normally. In addition, if the user confirms that the current location is correct, you can not do this.
3. Before processing, the user usually loads the required machining program. Otherwise, some functions related to automatic machining are invalid. Selecting the "Open (F)|Open (O)..." menu will bring up the Windows standard file operation dialog, from which you can select the drive, path, and file name where you want to open the file. After clicking the "Open" button, the machining program is loaded into the system.
4. Determine the workpiece origin, manually move the X and Y directions of the stone engraving machine to the desired origin position on the workpiece, select the "Set the current point as the workpiece origin" menu, or set the coordinate value of the current position in the coordinate window. Cleared, so that when the machining program is executed, the current position is used as the starting point for machining.
