Maintenance and operation are the same for the machine. If you don't operate, the machine will soon be broken, so the operation can be said to be more important than maintenance. Woodworking machine manufacturers will share the operation knowledge today.
Woodworking engraving tools cause wood fluffing to be affected by many factors, such as the viewpoint of the blade; the angle of the blade; the accuracy of the spindle; the wear of the bearing; the stability of the workpiece feeding, can you think about the big face or the feeding? And so on. However, in general, most of them are made by the cutting edge of the carpenter's tool and the cutting amount is too large. The low-density middle of most wood-based panels is the high-risk section of burrs. Using the right tools to set the optimal parameters of the carpenter's machinery and equipment, the normal protection of the equipment and tools is the guarantee of the lubricated appearance of the wood cutting.
1. Theoretical basis: The training work must start from the theoretical training work, and the operators must conduct practical operation training under the condition that the theoretical assessment is passed. If the theoretical training is not passed, it is absolutely impossible to conduct operational training.
2. The use of woodworking engraving tools: After the theoretical training, the training of the tools must be carried out. Operators must be aware of common tools, engraving motor speeds, travel speeds, precautions, etc. Operators must be familiar with the application of the tool.
3, the scope of application of the material: operators must be familiar with the application range of various materials, familiar with different materials, different thicknesses, different finished products and so on. Familiar with different engraving methods for different materials.
4. Operation of various software of woodworking engraving machine: After the above training, software training can be carried out. The training of the software is mainly concentrated in the field of user application; the aspects that are not required by the user can be self-learned according to the training manual. The software requirements are: various types of software layout, various operations, path generation, and the ability to quickly find path errors.
5. Machine operation training: After the above various trainings, after the training personnel explained and the operator's understanding and assessment: the operator's operation safety and operation precautions are trained, and the trainees in the operation safety matters After the signature is approved, the operator can perform machine operation training.
6, woodworking engraving machine operation of various precautions and training of woodworking machine maintenance.
