How is the advertising engraving machine diagonal?

1. Loosen the screws on the gantry and move the machine back and forth according to the error. Then tighten the screws that fix the gantry so that the adjusted gantry is not tilted (this method is only applicable to steel gantry)

2. The gantry of the cast aluminum side plate needs to loosen the slider and the gear box to move back and forth according to the error.

3. If there is such a problem with the screw drive machine, you need to replace the silk mother and adjust the gantry support plate.

How to pay attention to the diagonal of the advertising engraving machine? The method of loosening the gear box to push the motor can only solve the problem temporarily.

How is the square engraving of the advertising engraving machine different?

1, the 1mX1.5m rectangle four corner points with a knife eye, measuring the diagonal length;

2. If there is any deviation, open the machine to one end, use a wooden stick to hold the Y-axis side, and pull the Y-axis to the top of the drive line.

3, the computer manually pulls off one side of the line every time 3mm impact;

4. Measure the diagonal again;

5. Repeat the adjustment until the two diagonals are within 1m.

How is the horse advertising engraving machine diagonal? Dema is a manufacturer specializing in the production of advertising engraving machines. Each factory must be a fine product. The advertising engraving machine after installation and commissioning does not need diagonal lines.

After talking about the diagonal of the advertising engraving machine, let’s talk about the characteristics of the DEMA-M2 advertising engraving machine.

1. A heavy-duty machining center suitable for gravity cutting.

2. The whole machine adopts a unique rack double drive structure, which improves the stability and tensile strength of the machine tool.

3. The whole plate welding structure is adopted, and the whole machine is formed into a one-time finishing process after heat treatment.

4. The table top is PVC vacuum adsorption plus aluminum alloy pressure groove, which can strongly adsorb materials of different areas and can be clamped.

5. It is equipped with mature Weihong control system to ensure the operation of the machine at high speed, fine serrated ripple, smooth bottom surface and clear outline.

6. High-flexible cable made of imported materials ensures that the machine tool is not easily broken during long-term repeated operation.

Is it better to use the engraving machine to select the power or the smaller the machine?

Too much power not only wastes power but also increases the cost of purchasing the customer. If the power is too small, the power of the engraving power cannot be used. Therefore, it is very important for the customer to select the power of the spindle motor suitable for them!

How many w machines are used to advertise the engraving machine?

The engraving object is a relatively soft material, so the spindle power of the advertising engraving machine can be within 1.5kw-3.0kw, so that the selection can achieve the purpose of engraving and cost.

How many w machines are better for other types of engraving machines?

1. Woodworking engraving machine: The spindle motor of woodworking engraving machine can choose its power according to the hardness of the processed wood: generally in the range of 2.2kw-4.5kw, this kind of matching is also the most reasonable.

2, stone engraving machine: the spindle power of the stone engraving machine of the manufacturer is relatively higher, generally in the range of 4.5kw-7.5kw, the most commonly used is the 5.5kw spindle motor.

3. Tombstone engraving machine: The spindle power of the tombstone engraving machine should also be selected according to the hardness of the processed stone. The general power can meet the customer's demand from 3.0kw to 4.5kw.

4, jade carving machine: jade carving machine due to the small spindle motor power of the bed is generally 1.5kw-3.0kw.