How to solve the lack of suction on the woodworking machine platform
In the use of woodworking engraving machines, there may be a phenomenon that the suction table has no suction and cannot absorb the plate. What is the reason for this? How should it be solved? Today, we will introduce you to the solution that the woodworking machine table does not absorb:
1. Is the motor line voltage normal?
2. Whether the water circulation air pump adds less water, whether the motor is stuck or not, and the rotating shaft of the motor fan protection net is removed;
3. The filter in the vacuum pump is blocked and cleaned;
4. The surface of the counter or pipe is trimmed by air leakage;
5, positive and negative exchange motor, any two lines change the direction of the motor.
The woodworking engraving machine uses vacuum adsorption to fix the plate, which not only can be firmly fixed, but also does not move and engrave the misalignment, etc., and the plate is fixed relative to the splint, which can save the plate and engrave to the edge of the plate, saving time and effort.
Engraving machine table structure
The engraving machine table has more than one slot on the plane plate, and the platen screws for clamping and positioning can be arranged in the slot. Since the flat plate of the workbench is provided with a groove, the circuit board can be disposed on the workbench through the platen screw, and the double-sided adhesive or adhesive is not required on the back surface, thereby ensuring the flatness of the surface of the circuit board.
Material: The material is high-strength cast iron HT200-250 working surface hardness is HB160-210. After two treatments (artificial annealing 600----700 and natural aging for 2---3 years, the precision of the product is stable and the wear resistance is good.
Cast iron casting, because graphite in cast iron is good for lubrication and oil storage, so wear resistance is good.
订阅:
博文 (Atom)

