What should I pay attention to when operating the engraving machine?

Engraving machine safety matters:

     1: When installing the flexible shaft or replacing the grinding head, be sure to unplug the power cord!
     2: The chuck of the soft shaft and the fuselage, the chuck of the soft shaft and the grinding head must be locked with a small wrench.
     3: When the engraving machine is powered on, the power switch must be in the OFF state.
     4: Before processing, in addition to fixing the workpiece to be fixed, the engraving machine should be tested (no-load), and the machining operation can be performed after confirming that there is no abnormality.
     5: Before using the machine, carefully check the grinding head used. It is strictly forbidden to use the damaged or cracked grinding head.
     6: Wear protective goggles when using the tool.
     7: When machining parts. The pressure exerted by the hand on the engraving machine should be properly controlled, and the excessive force should not be used.
     8: When using the cutting piece, it is necessary to ensure that the person deviates from the tangential direction of the cutting piece to prevent the cutting piece from injuring people.

Woodworking engraving machine purchase reason

Woodworking engraving machine size selection
The customer should select the model of the engraving machine and its power according to the needs of the business and the funding situation.
Woodworking engraving machine
Generally, the small-format engraving machine has 600mm×600mm and 600mm×900mm, and the feeding width is 700mm. The engraving two-color board is the most basic application of the small-format engraving machine, and the acceptance is very good. The price of the smaller engraving machine is similar to that of the engraving machine, but it is more troublesome and unnecessary waste when engraving the two-color board.
The large-format engraving machine has 1200mm×1200mm, 1200mm×1500mm, 1200mm×2400mm, 1300mm×2500mm, 1500mm×2400mm, 2400mm×3000mm. The engraving machine of the above models has a feeding width of more than 1350mm, and the plexiglass and PVC on the market. The size of the board is 1220mm × 2440mm, so these models are suitable for customers who require large-format engraving machines.