Woodworking engraving machine is mainly used for processing machinery on wood. This is a scientific and mechanical engraving machine controlled by computer. Nowadays, it is also widely used in the woodworking industry, advertising industry, etc. The use of machines is to make the processed products more beautiful and more artistic. The use of the engraving machine should refer to the normalization operation, so what kind of use is the norm?
1. Check if there is any fault before the machine is started. Before the machine is used, it is necessary to check the machine to be operated. If the fault is found, it can be repaired immediately, and there will be problems during use, which will affect the processing. If you check it, it is necessary to see if the power supply is plugged in. The screws on the machine are tightly tightened, and the loose parts need to be tightened.
2, the operating speed can not be too fast. The knives of the engraving machine are used for engraving. The speed of the machine is too fast, which is the loss of the machine at home. In general operation, there is a prescribed speed. It should not be too fast or too slow. Otherwise, the effect of engraving is not very good. Pay attention when carving.
3. After the processing is completed, it is necessary to clean the countertop. It can't be said that after the engraving is finished, you can turn off the machine. All you need to do is sculpted wood chips, which have to be removed. Do not leave them on the countertop. If you use cleaning equipment, you need to wear dustproof clothing or gloves. You can't put dust into your lungs. For operational problems, please consult the woodworking machine manufacturer and other related matters.
