Woodworking engraving machine engraving software installation method
The carpenter carving machine operation principle is to be carved out by a special planning software, and then imported into the control system, and the carving equipment performs the fully automated carving operation according to the carving instructions. The commonly used carving planning software includes Wentai, Jingdiao, Type3 software, Artcan, Ucancam, Caxa, Mastercam, UG and other software. But for beginners, these software installations are still inevitable. In this regard, Jinan carpenter carving machine manufacturers take Wentai carving software as an example to introduce the device flow.
First, pry the random software CD into the computer CD-ROM drive. After entering the CD-ROM, find the “Wentai Carving” folder and double-click to open the folder. Double-click the “Setup” device file with the computer icon. The software defaults the device language to “Simplified Chinese”, click “OK” to start the device program; click “Next”, click “Yes” to pop up “Select Target Orientation” "Window, if you directly click "Next" software default device in the C drive root, according to the actual situation, we advocate that it is best not to install in the C drive, please click on the "read" around, change the device path For "D:/Artcut6", install the software in the "artcut6" folder of the D drive, click "OK" to come back, and then click "Next" to pop up the "Setting Type" window. Please select "Maximum". Device option, click “Next”; click “Next” again to start the software device process. When the progress bar shows 100%, the software device is completed. Then, restart your computer to run.
Other engraving software devices are not much different from Wentai devices, and are mostly installed according to such device flow and selection methods. At the end of the installation, the method can be modified according to the sample to be carved by the carpenter carving machine.