How to effectively solve the rust of the stone engraving machine spindle?
The hardness of the stone is higher, and the requirements for the engraving machine are higher than those of other engraving materials. Therefore, the performance of the stone engraving machine is also very high. Stone engraving machine can be used for stone engraving, stone relief, stone yang carving, stone yin carving, stone line carving, stone cutting, stone hollowing, suitable for engraving and manufacturing of tombstone carving, stone carving crafts and other workpieces.
With the increasing number of users of CNC engraving machines, stone engraving machines have also received more attention.
Due to the influence of the working environment, the motor spindle of the stone engraving machine will rust. If it is not treated for a long time, it will shorten the life of the spindle motor and affect the use of the stone engraving machine. The following small series introduces you to the stone engraving machine. Rust solution
First, the physical method of derusting: by manual knocking, shovel, scraping, brushing, sand or flexible frustration to eliminate the appearance of scale, scale, etc., this is a painter radical derusting method, you can also use a blade, scraper, tip Head hammer, wire brush, abrasive cloth, broken saw blade and other tools are also the easiest method.
Second, the chemical method of rust: you can use WD-40 cleaning lubricant, evenly sprayed on the motor, about half an hour you can use a cotton cloth to wipe off the rust on the stone engraving machine, if the rust is powerful, you can get more than a few times. WD-40 is not conductive, and has a good lubrication effect.