Extend the maintenance and maintenance of TIMKEN angular contact ball bearings




In order for TIMKEN bearings to be fully utilized and to maintain their proper performance for a long time, regular maintenance (regular inspection) must be performed.

Through proper periodic inspections, early detection of failures and prevention of accidents are important to improve productivity and economy.

1, cleaning

When the angular contact ball bearing is removed for inspection, the appearance record is first recorded by photography. Also, verify the amount of lubricant remaining and sample the lubricant before cleaning the bearings.

a. The cleaning of the bearing is carried out by rough washing and fine washing, and a metal mesh frame can be placed on the bottom of the used container.

b. When rough washing, remove the grease or adhesive with a brush or the like in the oil. At this time, if the TIMKEN bearing is rotated in the oil, be careful that the rolling surface will be damaged by foreign matter or the like.

c. When washing finely, slowly rotate the bearing in the oil and carry out it carefully.

The cleaning agent generally used is a neutral non-aqueous diesel oil or kerosene, and a warm alkali liquid or the like is sometimes used as needed. Regardless of which cleaning agent is used, it is often filtered and kept clean.

Immediately after cleaning, apply anti-rust oil or anti-rust grease to TIMKEN bearings.

2, inspection and judgment

In order to judge whether the removed angular contact ball bearings can be reused, it is important to check the dimensional accuracy, rotation accuracy, internal clearance, mating surfaces, raceway surfaces, cages and seals.

Regarding the inspection result, it can be judged by a person who is using a conventional bearing or a proficient bearing.

The criteria for judgment vary depending on mechanical properties and importance, inspection period, and the like. Bearings must not be reused if they are damaged and must be replaced.

1) Breakage and defects of bearing components.

2) Peeling of the rolling surface of the raceway surface.
For more information and purchase please visit: https://www.supplyforever.com