How is the engraving machine pvc carved burr?

1, the spindle speed problem: normal is generally between 2000-24000 rpm, the spindle speed is too low, there will be burrs

2, the material itself is raw.

3. The tool is not suitable.

4, the tool is not replaced for a long time, the blade wear and tear.

5, the tool is not replaced for a long time, the blade wear and tear.

6. If the amount of knife is too large or too small, it will lead to too much knife: the cutting force is too large, the tool deformation is large, and the processed surface is not smooth; the amount of knife is too small: the phenomenon of processing slippage occurs, resulting in The processed surface is not smooth.

7, clockwise processing will cause PVC burrs.

8. This phenomenon can also occur when the machine is unstable.
How to solve the engraving machine pvc carved burrs?

1. Check if the spindle speed is too low. If it is too low, increase the speed.

2, check whether the material itself is raw, if it is, then replace the quality of other brands of pvc.

3. Check if the tool is suitable for PVC processing.

4. Check if the tool is worn. If it is worn out, replace it with a new one.

5. Check if the parameter settings are correct. If it is not correct, adjust it.

6, check the status of eating knife.

7. Check if the processing is counterclockwise, if not, please adjust it.

8. Check if the engraving machine is loose or not. If it is loose, tighten it.

Through the above-mentioned troubleshooting and adjustment, the engraving machine pvc carved burrs should be solved.
How to deal with the engraving machine pvc carved burrs?

After cutting, the edge burrs are removed by a blade. If there is uneven cutting (such as the movement of the plate leaving a knife mark), it can be flattened with a small shovel.

The processing of the engraving machine pvc carved?

1. PVC can be bonded to each other with universal glue and PVC glue. After bonding, it must be pressed with heavy objects. It can be used after 5-12 hours. (Paste with the two-color plate reference above)

2. When spraying, the surface dust and impurities must be cleaned and can be wiped off with alcohol. When painting, except for the front side, each side should be painted at a temperature of about 60-80 degrees from four directions. The primer should be sprayed less and evenly for the first time. After the paint is dried, the second painting can be carried out, after about three to five times.

Engraving machine pvc carved burr more than how, how to solve all understand, everyone has more understanding of the engraving machine and pvc.

What should I pay attention to when operating the engraving machine?

Engraving machine safety matters:

     1: When installing the flexible shaft or replacing the grinding head, be sure to unplug the power cord!
     2: The chuck of the soft shaft and the fuselage, the chuck of the soft shaft and the grinding head must be locked with a small wrench.
     3: When the engraving machine is powered on, the power switch must be in the OFF state.
     4: Before processing, in addition to fixing the workpiece to be fixed, the engraving machine should be tested (no-load), and the machining operation can be performed after confirming that there is no abnormality.
     5: Before using the machine, carefully check the grinding head used. It is strictly forbidden to use the damaged or cracked grinding head.
     6: Wear protective goggles when using the tool.
     7: When machining parts. The pressure exerted by the hand on the engraving machine should be properly controlled, and the excessive force should not be used.
     8: When using the cutting piece, it is necessary to ensure that the person deviates from the tangential direction of the cutting piece to prevent the cutting piece from injuring people.